DTC P1705 THROTTLE POSITION SENSOR

AT-7075spec table

Description

The throttle position sensor detects the throttle valve position and sends a signal to the TCM.

CONSULT-II REFERENCE VALUE IN DATA MONITOR MODE

NOTE

Remarks: Specification data are reference values.

CONSULT-II reference values — throttle position sensor

Monitor item	Condition	Specification
Throttle position sensor	Fully-closed throttle	Approximately 0.5V
Throttle position sensor	Fully-open throttle	Approximately 4.5V

Throttle position sensor

ConditionFully-closed throttle

SpecificationApproximately 0.5V

Throttle position sensor

ConditionFully-open throttle

SpecificationApproximately 4.5V

TCM TERMINALS AND REFERENCE VALUE

NOTE

Remarks: Specification data are reference values.

TCM terminals — throttle position sensor

Terminal No.	Wire color	Item	Condition	Judgement standard (Approx.)
35	R/L	Throttle position sensor	Ignition switch ON, engine not running. When depressing or releasing accelerator pedal slowly after warming up engine. (Voltage rises gradually in response to throttle position.)	Fully-closed throttle: 0.5V. Fully-open throttle: 4.5V

Wire colorR/L

ItemThrottle position sensor

ConditionIgnition switch ON, engine not running. When depressing or releasing accelerator pedal slowly after warming up engine. (Voltage rises gradually in response to throttle position.)

Judgement standard (Approx.)Fully-closed throttle: 0.5V. Fully-open throttle: 4.5V

ON BOARD DIAGNOSIS LOGIC

Code P1705

TP SEN/CIRC A/T

Possible Causes

Harness or connectors (The sensor circuit is open or shorted.)
Throttle position sensor

Support our work!