DTC P1753 SHIFT CONTROL SOLENOID CIRCUIT — Description / Reference Values / On Board Diagnosis Logic / DTC Confirmation Procedure
AT-7083prose procedureDescription
NOTE
Shift control pressure is controlled by a signal sent from TCM to regulate shift change by steel belt.
CONSULT-II Reference Value in Data Monitor Mode
NOTE
Remarks: Specification data are reference values.
SH CONT SOL
ConditionVehicle is being driven.
SpecificationApprox. 0 - 1.0A
*SH CONT SOL
ConditionVehicle is being driven.
SpecificationApprox. 0 - 1.0A
TCM Terminals and Reference Value
NOTE
Remarks: Specification data are reference values.
5
Wire colorL/W
ItemShift control solenoid valve
Condition"D" positions, and accelerator pedal and brake pedal released after driving
Judgement standard (Approx.)3 - 5V
On Board Diagnosis Logic
CONSULT-II screen text
IdentifierSH CONT SOL
Malfunction is detected when ...TCM detects malfunction in drive circuit.
Check items (Possible cause)Harness or connectors (The solenoid circuit is open or shorted.); Shift control solenoid valve
GST (OBD-II)
IdentifierP1753
Malfunction is detected when ...TCM detects malfunction in drive circuit.
Check items (Possible cause)Harness or connectors (The solenoid circuit is open or shorted.); Shift control solenoid valve
MI / NO TOOLS code
IdentifierMI Code No. 1753
Malfunction is detected when ...TCM detects malfunction in drive circuit.
Check items (Possible cause)Harness or connectors (The solenoid circuit is open or shorted.); Shift control solenoid valve
Diagnostic Trouble Code (DTC) Confirmation Procedure
CAUTION
Always drive vehicle at a safe speed.
NOTE
If "DIAGNOSTIC TROUBLE CODE CONFIRMATION PROCEDURE" has been previously conducted, always turn the ignition switch "OFF" and wait at least 5 seconds before conducting the next test.
NOTE
After the repair, perform the following procedure to confirm that the malfunction is eliminated.
With CONSULT-II
- 1Turn ignition switch "ON" and select "DATA MONITOR" mode for "ENGINE" with CONSULT-II. If the check result is NG, go to "Diagnostic Procedure", AT-7086.
SAT651J