DTC P1705 THROTTLE POSITION SENSOR

AT-7076prose procedure

Description (Cont'd)

DIAGNOSTIC TROUBLE CODE (DTC) CONFIRMATION PROCEDURE

CAUTION

Always drive vehicle at a safe speed.

NOTE

If "DIAGNOSTIC TROUBLE CODE CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch "OFF" and wait at least 5 seconds before conducting the next test.

After the repair, perform the following procedure to confirm the malfunction is eliminated.

With CONSULT-II

DTC P1705 confirmation procedure (With CONSULT-II)

1
Turn ignition switch "ON" and select "DATA MONITOR" mode for "CVT" with CONSULT-II.
SAT651J
2
Check the following. If the check result is NG, go to "DIAGNOSTIC PROCEDURE", AT-7078. If the check result is OK, go to following step.
3
Turn ignition switch "ON" and select "DATA MONITOR" mode for "ENGINE" with CONSULT-II.
SAT651J
4
Start engine and maintain the following conditions for at least 1 consecutive second. Then release accelerator pedal completely. ENG SPEED: 500 rpm or more. If the check result is NG, go to "DIAGNOSTIC PROCEDURE", AT-7078.

THRTL POS SEN (Step 2) — accelerator pedal vs reading

Accelerator pedal condition	THRTL POS SEN
Fully released	Approx. 0.5V
Fully depressed	Approx. 4.5V

Fully released

THRTL POS SENApprox. 0.5V

Fully depressed

THRTL POS SENApprox. 4.5V

With GST

Follow the procedure "With CONSULT-II".

Support our work!