DTC P1766 TORQUE CONVERTER CLUTCH CONTROL FUNCTION — Description (Cont'd) / With CONSULT-II / With GST
AT-7100prose procedureDescription (Cont'd)
With CONSULT-II
- 1Turn ignition switch "ON" and select "DATA MONITOR" mode for "ENGINE" with CONSULT-II.
SAT577J - 2Start engine and maintain the following conditions for at least 5 consecutive seconds. Selector lever: D position ENG SPEED: 500 rpm or more FLUID TEMP SE: 20 - 99°C (68 - 210°F) If the check result is NG, replace CVT assembly.
With GST
NOTE
Follow the procedures under "With CONSULT-II".