DTC P1756 LINE PRESSURE CONTROL SENSOR FUNCTION
AT-7086spec tablePossible-cause cell shows only 'Line pressure solenoid valve' though the DTC name targets the sensor function; transcribed as printed.
Description
Line pressure is controlled by a signal sent from TCM to generate the line pressure necessary for torque transmission by steel belt. The pressure is returned from the line pressure control sensor to TCM, and it is regulated continuously to maintain the target oil pressure.
CONSULT-II REFERENCE VALUE IN DATA MONITOR MODE
NOTE
Remarks: Specification data are reference values.
CONSULT-II reference values — line pressure solenoid
LINE PRES SOL
ConditionVehicle is being driven.
SpecificationApprox. 0 - 1.0A
*LINE PRES SOL
ConditionVehicle is being driven.
SpecificationApprox. 0 - 1.0A
TCM TERMINALS AND REFERENCE VALUE
NOTE
Remarks: Specification data are reference values.
TCM terminals — line pressure control sensor / solenoid
6
Wire colorW/G
ItemLine pressure control solenoid valve
ConditionIgnition switch ON, engine running. "D" positions, and accelerator pedal and brake pedal released after driving.
Judgement standard (Approx.)4 - 6V
27
Wire colorB/R
ItemLine pressure control sensor
ConditionIgnition switch ON, engine running. When setting selector lever other position.
Judgement standard (Approx.)0.5V
27
Wire colorB/R
ItemLine pressure control sensor
ConditionIgnition switch ON, engine running. When setting selector lever "N" position.
Judgement standard (Approx.)1.8V
43
Wire colorW/B
ItemLine pressure control sensor (Ground)
Condition—
Judgement standard (Approx.)—