DTC P0710, P0711 CVT FLUID TEMPERATURE SENSOR CIRCUIT
AT-7061flowchartDiagnostic Procedure (Cont'd)
DTC P0710/P0711 CVT fluid temperature sensor diagnostic flow (steps 3-4)
1
CHECK INPUT SIGNAL OF CVT FLUID TEMPERATURE SENSOR (Without CONSULT-II)
2
OK or NG
NG
Check the following item: Harness for short to ground or short to power or open between TCM, ECM and terminal cord assembly (Main harness). Ground circuit for ECM (Refer to EC section "TROUBLE DIAGNOSIS FOR POWER SUPPLY").
Check the following item: Harness for short to ground or short to power or open between TCM, ECM and terminal cord assembly (Main harness). Ground circuit for ECM (Refer to EC section "TROUBLE DIAGNOSIS FOR POWER SUPPLY").
OK / GO TO 4
3
GO TO 4.
4
CHECK DTC
5
OK or NG
NG
1. Perform TCM input/output signal inspection. 2. If NG, recheck TCM pin terminals for damage or loose connection with harness connector.
OK
INSPECTION END