PREPARATION — Special Service Tools
MT-3spec tableF41A transaxle reference noted on bearing height gauge set usage.
NOTE
*: Special tool or commercial equivalent
Special Service Tools
KV38102100* — Drift
Descriptiona: 44 mm (1.73 in) dia. / b: 24.5 mm (0.965 in) dia.
UsageInstalling input shaft oil seal; Installing input shaft rear bearing
KV381062S0 — Bearing height gauge set (1 KV38106210 Main shaft dummy gauge; 2 KV38106220 Diff.side bearing dummy gauge; 3 KV38106230 Knock pin collar; 4 KV38106240 Collar and bolt set)
DescriptionSet of dummy gauges, knock-pin collar, and collar/bolt set
UsageAdjusting mainshaft – and differential side bearing preload (F41A)
ST33200000* — Drift
Descriptiona: 60 mm (2.36 in) dia. / b: 44.5 mm (1.752 in) dia.
UsageInstalling mainshaft front bearing outer race
ST22350000* — Drift
Descriptiona: 34 mm (1.34 in) dia. / b: 28 mm (1.10 in) dia.
UsageInstalling input shaft front bearing
ST22452000* — Drift
Descriptiona: 45 mm (1.77 in) dia. / b: 36 mm (1.42 in) dia.
UsageInstalling 1st & 2nd synchronizer
ST37750000* — Drift
Descriptiona: 40 mm (1.57 in) dia. / b: 31 mm (1.22 in) dia.
UsageInstalling 5th main gear; Installing 3rd & 4th synchronizer