BODY END — Body Front End (Cont'd) — Hood lock and bumper rubber adjustment / Front bumper assembly exploded view
BF-7004parts diagramBody Front End (Cont'd)
Hood lock adjustment
Adjust hood so that hood primary lock meshes at a position 1 to 1.5 mm (0.039 to 0.059 in) lower than fender.
After hood lock adjustment, adjust bumper rubber.
CAUTION
When securing hood lock, ensure it does not tilt. Striker must be positioned at the center of hood primary lock.
After adjustment, ensure that hood primary and secondary lock operate properly.
Hood lock secondary latch hooking length
| Specification | Value |
|---|---|
| Hood lock secondary latch hooking length | More than 5.0mm (0.197 in) |
Hood lock secondary latch hooking length
More than 5.0mm (0.197 in)
Bumper rubber adjustment
Adjust so that hood is aligned with fender. At that time deflection is approx. 2 mm (0.08 in). [Bumper rubber free height is approx. 13 mm (0.51 in)]
Parts DiagramFig. fig1
| Specification | Value |
|---|---|
| Bumper stay mounting bolts (★)Tightening torque | 21 - 26N·m |
| Bumper assembly mounting screws / nuts / clips (★)Tightening torque | 13 - 16N·m |
Bumper stay mounting bolts (★)Tightening torque
21 - 26N·m
Bumper assembly mounting screws / nuts / clips (★)Tightening torque
13 - 16N·m