TROUBLE DIAGNOSES — Supplemental Restraint System (SRS) — Self-diagnosis (Cont'd) — Flash code chart
BF-6035spec tableSelf-diagnosis (Cont'd)
AIR BAG warning lamp flash code chart (diagnosis mode) — page 3
The side air bag module (LH) circuit is malfunctioning ((f): 2 flashes).
Flash patternIGN ON: OFF 7 sec, ON 2 sec / 1.5 sec / 0.5 sec / 1.5 sec marker. (a) through (f) repeated. (SRS337)
Description(a) through (f) are repeated. (f) — Two flashes indicate malfunctioning side air bag module (LH) circuit.
Repair orderRecheck SRS at each replacement. 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. 3. Replace side air bag module (LH). 4. Replace driver's air bag module. (Before disposal, it must be deployed.) 5. Replace the diagnosis sensor unit. 6. Replace the harness.
The satellite sensor (RH) is malfunctioning ((f): 3 flashes).
Flash patternIGN ON: OFF 7 sec, ON 2 sec / 1.5 sec / 0.5 sec / 2 sec / 1.5 sec marker. (a) through (f) repeated. (SRS340)
Description(a) through (f) are repeated. (f) — Three flashes indicate malfunctioning satellite sensor (RH) circuit.
Repair orderRecheck SRS at each replacement. 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. 3. Replace the satellite sensor (RH). 4. Replace the diagnosis sensor unit. 5. Replace the harness.
The satellite sensor (LH) is malfunctioning ((f): 4 flashes).
Flash patternIGN ON: OFF 7 sec, ON 2 sec / 1.5 sec / 0.5 sec / 2 sec marker. (a) through (f) repeated. (SRS339-A)
Description(a) through (f) are repeated. (f) — Four flashes indicate malfunctioning satellite sensor (LH) circuit.
Repair orderRecheck SRS at each replacement. 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. 3. Replace the satellite sensor (LH). 4. Replace the diagnosis sensor unit. 5. Replace the harness.
NOTE
* Follow the procedures in numerical order when repairing malfunctioning parts. Confirm whether malfunction is eliminated using the air bag warning lamp (in User mode) or CONSULT each time repair is finished. If malfunction is still observed, proceed to the next step. When malfunction is eliminated, further repair work is not required.