TROUBLE DIAGNOSES FOR SELF-DIAGNOSTIC ITEMS — Diagnostic Procedure 2 (ABS actuator solenoid valve and solenoid valve relay) (Cont'd)
BR-7037flowchartDiagnostic Procedure 2 (ABS actuator solenoid valve and solenoid valve relay) (Cont'd)
1
(from A) REPLACE — Replace fusible link. Does the fusible link blow out when ignition switch is turned ON?
No
Inspection end
Yes
2
B — CHECK SOLENOID VALVE RELAY POWER SUPPLY CIRCUIT. 1. Disconnect battery cable and ABS actuator and electric unit connector. 2. Check continuity between ABS actuator and electric unit connector (E96) body side terminal 18 and ground. Continuity should NOT exist.
NG
Check the following: • Harness connector (E96). • Harness for open or short between ABS actuator and electric unit and fusible link. If NG, repair harness or connector.
Check the following: • Harness connector (E96). • Harness for open or short between ABS actuator and electric unit and fusible link. If NG, repair harness or connector.
OK
3
REPLACE — Replace ABS actuator and electric unit.