REAR DISC BRAKE — Exploded view / Removal

BR-22parts diagram

Legend prints 'Poly Butyl Cuprysil' on this page (vs 'Poly Botyl Cyprysil' on the front-disc page BR-18). Both refer to the same grease type; captured verbatim per page.

Continued from BR-21

Parts Diagram

#	Part Name	Notes
1	Torque member	Caliper bracket
2	Torque member fixing bolt	54 - 64 N·m (5.5 - 6.5 kg·m, 40 - 47 ft·lb)
3	Main pin (×2)	Apply rubber grease at sliding surface
4	Pin boot (×2)	Apply rubber grease; do not re-use
5	Pin bolt	22 - 32 N·m (2.2 - 3.3 kg·m, 16 - 24 ft·lb)
6	Cylinder (body)	Caliper cylinder body
7	Connecting bolt	28 - 34 N·m (2.9 - 3.5 kg·m, 21 - 25 ft·lb)
8	Copper washer	Do not re-use
9	Bleed screw	7 - 13 N·m (0.7 - 1.3 kg·m, 5.1 - 9.4 ft·lb)
10	Stopper bolt	10 - 12 N·m (1.0 - 1.2 kg·m, 7 - 9 ft·lb)
11	Cable mounting bracket / bolt	31 - 35 N·m (3.1 - 3.6 kg·m, 22 - 26 ft·lb)
12	Parking brake lever	Operates internal cam
13	Return spring	Returns parking brake lever
14	Piston	Apply brake fluid
15	Piston seal — Ring A	Apply rubber grease; do not re-use
16	Dust seal — Ring B	Apply rubber grease; do not re-use
17	Push rod	Screw-back adjuster rod
18	O-ring	Apply rubber grease; do not re-use
19	Key plate	Locates piston anti-rotation
20	Seat	Adjuster seat
21	Spring	Adjuster spring
22	Spring cover	Adjuster spring cover
23	Adjusting nut	Apply P.B.C. grease at contact
24	Cup	Adjuster cup
25	Ball bearing	Adjuster bearing
26	Wave washer	Adjuster preload
27	Spacer	Adjuster spacer
28	Rod	Internal rod
29	Pad	Inner and outer
30	Inner shim / Outer shim	Pad-side shims
31	Pad retainer	Apply P.B.C. grease at pad contact area

Removal

WARNING

Clean brake pads with a vacuum dust collector to minimize the hazard of airborne materials.

CAUTION

Suspend caliper assembly with wire so as not to stretch brake hose.

1
Remove brake cable mounting bracket bolt and lock spring.
SBR087B
2
Remove torque member fixing bolts and connecting bolt.

NOTE

It is not necessary to remove connecting bolt except for disassembly or replacement of caliper assembly.

Specification	Value
Torque member fixing bolt	≈530 - 628N·m
Pin bolt	22 - 32N·m (2.2 - 3.3 kg·m, 16 - 24 ft·lb)
Connecting bolt (brake hose)	28 - 34N·m (2.9 - 3.5 kg·m, 21 - 25 ft·lb)
Cable mounting bracket bolt	31 - 35N·m (3.1 - 3.6 kg·m, 22 - 26 ft·lb)
Bleed screw	7 - 13N·m (0.7 - 1.3 kg·m, 5.1 - 9.4 ft·lb)
Stopper bolt	10 - 12N·m (1.0 - 1.2 kg·m, 7 - 9 ft·lb)

Torque member fixing bolt

530 - 628N·m

Pin bolt

22 - 32N·m (2.2 - 3.3 kg·m, 16 - 24 ft·lb)

Connecting bolt (brake hose)

28 - 34N·m (2.9 - 3.5 kg·m, 21 - 25 ft·lb)

Cable mounting bracket bolt

31 - 35N·m (3.1 - 3.6 kg·m, 22 - 26 ft·lb)

Bleed screw

7 - 13N·m (0.7 - 1.3 kg·m, 5.1 - 9.4 ft·lb)

Stopper bolt

10 - 12N·m (1.0 - 1.2 kg·m, 7 - 9 ft·lb)

Support our work!

REAR DISC BRAKE — Exploded view / Removal

Removal

Search Manual