POWER STEERING OIL PUMP
ST-28parts diagramParts DiagramFig. fig1
| Specification | Value |
|---|---|
| Pulley nutTightening torque | 16 - 22N·m |
| Upper pump boltsTightening torque | 15 - 25N·m |
| Pump bracket boltsTightening torque | 32 - 42N·m |
| Banjo union boltTightening torque | 49 - 69N·m |
Pulley nutTightening torque
16 - 22N·m
Upper pump boltsTightening torque
15 - 25N·m
Pump bracket boltsTightening torque
32 - 42N·m
Banjo union boltTightening torque
49 - 69N·m
Removal
- 1Drain fluid from system by removing hose from suction pipe.
- 2Slacken power steering drive belt (refer to MA section for details).See MA section
- 3Remove Banjo union, and remove hose from pump.
- 4Remove pump fixing bolts and remove pump.
NOTE
Replace power steering oil pump if any of the following items are found:
a) Oil leak from connections, unions or oil pump casing.
b) Deformed or damaged pulley.
c) Poor performance.
Disassembly
CAUTION
• Parts which can be disassembled are strictly limited. Never disassemble parts other than those specified.
• Disassemble in as clean a place as possible.
• Clean your hands before disassembly.
• Do not use rags; use nylon cloths or paper towels.
• Follow the procedures and cautions in the Service Manual.
• When disassembling and reassembling, do not let foreign matter enter or contact the parts.