SERVICE DATA AND SPECIFICATIONS (S.D.S.)
FA-24spec tableFront stabilizer bar specs are listed for the 1.3ℓ model only. Wheel alignment and turning-angle values differ between 1.0ℓ (155/70R13) and 1.3ℓ (175/60 R13).
General Specifications (Cont'd)
SHOCK ABSORBER
Shock Absorber — General Specifications
Damping force N (kg, lb) [at 0.3 m (1.0 ft)/sec.] — Expansion
1.0ℓ500 - 700
1.3ℓ500 - 700
Damping force N (kg, lb) [at 0.3 m (1.0 ft)/sec.] — Compression
1.0ℓ230 - 400
1.3ℓ230 - 400
Piston rod diameter mm (in)
1.0ℓ18 (0.71)
1.3ℓ18 (0.71)
FRONT STABILIZER BAR
Front Stabilizer Bar — General Specifications
Stabilizer bar diameter mm (in)
1.3ℓ20 (0.79)
Identification color
1.3ℓYellow
Inspection and Adjustment
WHEEL ALIGNMENT (Unladen*1)
Wheel Alignment (Unladen)
Camber (degree)
1.0ℓ−0°26' to 1°4'
1.3ℓ−0°22' to 1°8'
Caster (degree)
1.0ℓ1°31' to 3°1'
1.3ℓ1°34' to 3°4'
Kingpin inclination (degree)
1.0ℓ11°52' to 13°22'
1.3ℓ11°47' to 13°17'
Total toe-in mm (in)
1.0ℓ−0.5 to 1.5 (−0.019 to 0.059) toe-in
1.3ℓ−0.5 to 1.5 (−0.019 to 0.059) toe-in
Total toe-in (degree)
1.0ℓ−0°5' to 0°16' toe-in
1.3ℓ−0°5' to 0°16' toe-in
Front wheel turning angle — Tyre size
1.0ℓ155/70R13
1.3ℓ175/60 R13
Front wheel turning angle — Full turn Inside (degree)
1.0ℓ37° - 41°
1.3ℓ34° - 38°
Front wheel turning angle — Full turn Outside (degree)
1.0ℓ32° - 35°
1.3ℓ29° - 33°
NOTE
*1: Fuel, radiator coolant and engine oil full. Spare tire, jack, hand tools and mats in designated positions.
LOWER BALL JOINT
Lower Ball Joint
Ball stud axial end play limit mm (in)
1.0ℓ, 1.3ℓ0 (0)
WHEEL RUNOUT
Wheel Runout
Radial runout limit mm (in)
Aluminum0.3 (0.012)
Steel0.5 (0.020)
Lateral runout limit mm (in)
Aluminum0.3 (0.012)
Steel0.8 (0.031)
WHEEL BEARING
Wheel Bearing
Wheel bearing axial end play limit mm (in)
1.0ℓ, 1.3ℓ0 (0)
Wheel bearing lock nut tightening torque N·m (kg-m, ft-lb)
1.0ℓ, 1.3ℓ148 - 205 (15.1 - 20.9, 109 - 151)