SERVICE DATA AND SPECIFICATIONS (S.D.S.)
CL-9spec tableDistinguishes CG10DE (160-mm disc, L160K cover) from CG13DE (180-mm disc, L180K cover) and R.H.D. vs L.H.D. pedal heights.
General Specifications
CLUTCH CONTROL SYSTEM
Clutch Control System
Type of clutch control
ValueMechanical type
CLUTCH DISC
Clutch Disc — General Specifications (Unit: mm (in))
Engine
CG10DECG10DE
CG13DECG13DE
Model
CG10DE160TBL
CG13DE180TBL
Facing size (Outer dia. x inner dia. x thickness)
CG10DE160 x 110 x 3.2 (6.30 x 4.33 x 0.126)
CG13DE180 x 125 x 3.2 (7.09 x 4.92 x 0.126)
Thickness of disc assembly with load
CG10DE6.7 - 7.3 (0.264 - 0.287) with 2940 N (300 kg, 662 lb)
CG13DE6.7 - 7.3 (0.264 - 0.287) with 3240 N (330 kg, 728 lb)
CLUTCH COVER
Clutch Cover — General Specifications
Engine
CG10DECG10DE
CG13DECG13DE
Model
CG10DEL160K
CG13DEL180K
Full-load N (kg, lb)
CG10DE3100 (316, 697)
CG13DE3500 (357, 787)
Inspection and Adjustment
CLUTCH PEDAL
Clutch Pedal (Unit: mm (in))
Applied model
R.H.D.R.H.D.
L.H.D.L.H.D.
Pedal height*
R.H.D.187 - 197 (7.36 - 7.76)
L.H.D.183 - 193 (7.09 - 7.60)
Pedal free travel
R.H.D.11 - 15.5 (0.43 - 0.61)
L.H.D.11 - 15.5 (0.43 - 0.61)
Withdrawal lever play
R.H.D.2.5 - 3.5 (0.10 - 0.14)
L.H.D.2.5 - 3.5 (0.10 - 0.14)
NOTE
*: Measured from surface of melt sheet to center of pedal pad surface.
CLUTCH DISC
Clutch Disc — Inspection and Adjustment (Unit: mm (in))
Disc model
160 TBL160 TBL
180 TBL180 TBL
Wear limit of facing surface to rivet head
160 TBL0.3 (0.012)
180 TBL0.3 (0.012)
Runout limit of facing
160 TBL1.0 (0.039)
180 TBL1.0 (0.039)
Distance of runout check point (from hub center)
160 TBL75 (2.95)
180 TBL85 (3.35)
Maximum backlash of spline (at outer edge of disc)
160 TBL0.45 (0.0177)
180 TBL0.6 (0.024)
CLUTCH COVER
Clutch Cover — Inspection and Adjustment (Unit: mm (in))
Cover model
L160KL160K
L180KL180K
Diaphragm spring height
L160K27 - 29 (1.06 - 1.14)
L180K29 - 31 (1.14 - 1.22)
Uneven limit of diaphragm spring toe height "A"
L160K0.8 (0.032)
L180K0.8 (0.032)